How much does an industrial generator for a plastic molding factory cost?

Nov 19, 2026Leave a message

Hey there! If you’re running a plastic molding factory, you already know how critical uninterrupted power is to your operation. One sudden blackout can ruin entire molding runs, waste raw plastic resin, and cost you thousands in lost production. That’s why figuring out how much an industrial generator for your plastic molding setup costs is such a big deal—and as someone who supplies these generators day in and day out, I’ve helped dozens of factory owners navigate this exact question. Let’s break it down without the confusing jargon, so you know exactly what to expect.

First off, let’s talk about why plastic molding has unique generator needs. Unlike other industries, plastic molding involves heavy equipment: injection molding machines, extruders, cooling systems, and material dryers. Most mid-sized molding lines run on 480V three-phase power, and a typical 50-ton injection molding machine alone uses around 100–150 kW at peak. Add in auxiliary gear, and a small factory (with 2–3 molding lines) might need 500–700 kW, while a larger one (6–8 lines) could need 800–1200 kW. That power demand is the biggest driver of generator cost, but it’s not the only one.

So, let’s get to the numbers. When people ask me “how much is an industrial generator for a plastic molding factory,” my answer always starts with generator size, because that’s the baseline. Let’s cover the most common sizes we supply for plastic plants:

For small to mid-sized factories (2–3 molding lines), a 700KW Diesel Engine Generator Set is a sweet spot. These are built to handle the peak and continuous load of auxiliary molding equipment, not just the main machines. Right now, the price point for a brand-new 700kW unit (ready to install, with basic controls) runs between $48,000 and $62,000. Wait, why the range? It’s all about extra features: if you want a weatherproof enclosure for outdoor placement, that adds about $5,000–$8,000. A parallel switch (so you can connect it to your utility grid for backup power without manual rewiring) is another $3,000–$4,500. Those little extras add up, but they’re totally worth it for a factory that can’t afford downtime.

For mid-sized factories (4–6 molding lines), an 800KW Cummins Diesel Generation unit is the go-to for most of our clients. Cummins is a reliable brand for industrial use—we’ve had zero major failures on these units in the last 5 years, which is huge for molding plants. The base price here is $55,000 to $70,000. Again, add on $6,000–$10,000 for a sound-attenuated enclosure (super important if your factory’s near residential areas), or $2,500–$4,000 for an automatic transfer switch that kicks on in 10 seconds flat. For context, a sudden outage in a plastic molding line can cost $1,500–$3,000 per minute in wasted material, so that automatic switch isn’t just a luxury—it’s a cost-saver.

If you’re running a large plastic molding operation (8+ lines, high-volume production), you’ll likely need a 1100KW Cummins Power Generator Set. These are heavy-duty, built to handle extended run times (up to 24 hours straight) without overheating. The base price for a 1100kW unit is $75,000 to $95,000. Again, customizations here can bump the price: a fuel tank that holds 500 gallons (so you don’t have to refuel mid-run) is $3,500–$5,500, and a remote monitoring system (so you can check fuel levels and run status from your phone or office) is $1,800–$3,000. For a factory that produces 10k+ parts a day, that remote monitor means you won’t have to send a tech out to check the generator every shift—another small win that adds up.

Wait, but what if you’re just testing the waters, or have a smaller molding shop with only 1–2 machines? We get that too. A 5kVA Silent Diesel Generator is way more than you need for backup power, but it’s a solid option for small setups. Its price is way lower—around $2,800 to $3,500. It’s not big enough to power entire molding lines, but it can keep your critical control panels running during short outages, so you don’t damage sensitive electronics. And for people who ask about residential generators? Yeah, those are totally different—we don’t recommend using a Diesel Generator For House for your factory, because residential units are built for 120V/240V single-phase power, which won’t handle the heavy three-phase load of your molding machines. That’s a common mistake, so always stick to industrial-rated units for your factory.

Now, let’s talk about hidden costs that people often forget, because that’s where you can end up paying more than you planned. First, installation: most industrial generators need a professional electrician and mechanic to set up. That includes running exhaust pipes, fuel lines, and wiring to your main power panel. For a 700kW or 800kW unit, installation usually runs $8,000–$15,000, depending on how far your power panel is from the generator’s spot. Then, there’s maintenance: diesel generators need regular oil changes, filter replacements, and load tests. We offer service plans for about $1,200–$2,500 a year, which is way cheaper than dealing with a broken generator when you’re in the middle of a big order. Also, fuel costs: diesel is around $3.50–$4 per gallon right now, and a 700kW unit uses about 10 gallons an hour at full load, so factor that into your long-term budget.

Diesel Generator For House800KW Cummins Diesel Generation best

Is it worth buying new vs used? I get it—used generators are cheaper, usually 30–50% less than new. But for a plastic molding factory, I almost always recommend new. Used generators might have hidden engine wear, and if they break down mid-production, you’re stuck with a big repair bill and lost time. A new generator comes with a 1–2 year warranty (Cummins even offers 3 years on some models) which gives you peace of mind. We’ve had clients who bought a used 800kW unit for $30,000, only to pay $12,000 in repairs 6 months later—totally not worth the savings.

Another thing to consider: your factory’s location. If you’re in an area with strict noise regulations (like near a residential neighborhood), a silent or sound-attenuated generator is non-negotiable, which adds that $5,000–$10,000 we talked about earlier. If you’re in a rural area with lots of space, an open-frame unit will save you money—they’re cheaper to buy and easier to maintain, though they’re louder.

Let me wrap this up with a quick example to make it real. Say you have a mid-sized plastic molding factory with 5 injection machines, total peak load of 750kW. That means an 800kW Cummins unit is perfect. Base price: $62,000. Add a sound enclosure ($7,000) and automatic transfer switch ($3,500), total is $72,500. Then installation is $10,000, and first-year maintenance plan is $1,800. So total startup cost is around $84,300. But compare that to what you’d lose if a single outage ruins a run: if you’re making plastic parts for a big retail client, one outage could mean losing that contract, which is way more than $84k. That’s why the investment makes sense.

If you’re still not sure which size generator you need, shoot us a message. We can help you calculate your exact power demand based on your number of molding machines, auxiliary equipment, and run schedule. We’ve worked with hundreds of plastic factories, so we know the ins and outs of what works for your industry—no guesswork, no overpriced add-ons you don’t need. Just straight talk about what will keep your production running smoothly.

Ready to get quotes, compare models, or ask more specific questions about generator specs for your plastic molding setup? Reach out to us to connect for procurement discussions. We’re here to make sure you get the right generator at a price that fits your budget, without any hidden fees or confusing fine print.

References

  1. Cummins Inc. Industrial Diesel Generator Specifications for Plastic Manufacturing Applications, 2024
  2. National Electrical Manufacturers Association (NEMA). Industrial Generator Installation Guidelines, 2023
  3. Plastics Industry Association (PIA). Power Reliability Best Practices for Manufacturing Facilities, 2024
  4. U.S. Energy Information Administration (EIA). 2024 Diesel Fuel Price Trends for Industrial Equipment